Members of Kodasema searching for a name for the initiative.
Tiit Sild: Kodasema is a village in Roosna-Alliku Parish in Järva County
that is just about everything Wikipedia has on the place. What is Your Kodasema?
Ülar Mark: Yes, there is a village and our name comes from there. In fact, the house built
by Kodasema can only be a KODA.The whole house is designed the way you could easily assemble and disassemble it. First assembly of Kodasema house took place in the factory.During TAB (Tallinn Architecture Biennale), you invited us to participate in a three-hour discussion group. The topic was “Footprints” and the discussion revolved around new technologies, the future of building industry, lifecycle of buildings, business models in housebuilding industry, tax fraud in building construction and ecological footprint created by a person over his or her lifetime. Such a global subject matter discussed by people with interesting opinions, created a perfect atmosphere for ambitious ideas. You organised 5 separate three-hour discussion groups for people with different backgrounds. What was the aim of these discussions?
Ülar: Our aim was to look at the concept of
residential construction in a wider and more holistic manner. The main
challenge, as is the case with our KODA project, was to avoid the trap of “it
has always been done this way”. The world and the possibilities it offers have
changed significantly in the last 20 years. However, construction is a
conservative field with a long established network of participants who are not
keen on change.
We introduced our work, explained what we do and
what we have accomplished after one year in business but also listened to
suggestions what to consider while building a place for living.
Floor slab of Kodasema house does not need heavy foundation, but correct leveling is important.
Bathroom is located behind the kitchen unit, as well as most of the smart technical solutions and the brain of the house. Preistalled kitchen has a weird appearance in direct sunlight.
but the envelope will be closed only minutes after.
Frontal panel of the Kodasema house is transported and assembled as a whole piece. Precision is important, so the windows and door have no frames.
Setup is complete, let the party begin...
Lighted entrance is acting as a lantern, sending an invitation to curious people walking nearby.
Kodasema’s goal is to elevate the production of prefab houses to a completely new level. You often compare it to the automotive industry. What are you doing in a different way compared to, for instance, an ordinary plant that manufactures houses from flat elements?
The main difference is the reduced or almost eliminated workload on the
construction site. A KODA is built in just 3-5 hours and that’s it. It doesn’t
even need foundations. The recommended soil preparation consists of spreading a
layer of gravel prior to placing the house in position. Plus the exterior and
interior decoration panels can be quickly installed. Traditionally interior
finishing work is mostly performed on site, after the prefab house is set up,
but in our case all of that’s done at the plant. This ensures better quality
and lower installation costs. Of course, water supply, electricity and sewerage
connections still have to be sorted out. Comparing it to a car factory is
fitting, really. Why don’t houses come with sophisticated electronics? Why
can’t houses be made with minute precision using robots? Why do all cars have
nice, carefully considered designs but most houses seem to be constructed in a
hurry, often with no design to see or speak of? It’s a glaring juxtaposition
when you remember that a used car usually ends up as scrap within about 15
years, but a house is expected to remain in use for centuries. Logically,
houses should have better design and functionality, but sadly the reality is
One of the founders of Kodasema, Ülar Mark (second from the left) is giving a tour to curious visitors.
Is Kodasema more like a traditional house manufacturer or a startup that is
still looking for its business model?
Kodasema can rather be described as a startup, that is looking for a new
approach to building construction and construction process as a whole. For
example, our house does not have window sashes in the traditional sense of the
word. They are simply unnecessary since the whole panel itself is the window sash.
Usually window openings are designed to be fitted with window sashes at a
cheaper price. However, this adds a number of problems: the space between the opening
and window frame must be adequate for fastenings, the sash itself must be
constructed of chambers, etc. All this in order to fill the opening while actually
simultaneously creating thermal bridges.
The creators of Kodasema house are six people with completely different
backgrounds. Tell us briefly what these people do and what drives them. What
brought this group together?
moment everybody seems passionate about the Koda project. Their backgrounds,
however, are indeed very different. Hannes Tamjärv has founded a bank and a
school and has been the brains behind a number of endeavours. Taavi Jakobson has
made a name for himself in international administration of IT field and is also
a writer. Kalev Ramjalg is a Master of building from concrete and a teacher who
has also written several plays. Marek Standberg is simply a man of multiple
talents ranging from chemistry to drawing comics. Andres Kaur is a project
manager who has put up plants. And Ülar Mark, an architect who has, in addition
to designing houses, launched the Estonian Centre of Architecture and created
theatre design. All in all, it would be quite difficult to find a field this
team cannot form an opinion about. Obviously, we also have several people who
deal with specific problems: structural designer, designers for ventilation,
water and sewerage etc.
You are completely devoted to the creation of Kodasema house. The first
prototype is ready. What have people´s reactions been? Are they willing to live
in Kodasema house?
reactions have been overwhelming but we are trying to keep a cool head about
it. First of all, we have already determined areas where improvements could be
made and secondly, the measure of our success will be the number of Koda houses
we manage to sell. I think we are providing a well-thought-out space and it
shows. Before long, we shall be testing living in the house at its current
location and there is no shortage of volunteers. The first trial will include
us and then everyone else who wants to try and give us feedback.
Kodasema houses look elegant, light and a little delicate. So what are
they made of? What materials are used in KODA’s walls, ceiling and roof?
The walls, floor and ceiling are of a similar composition: fibre-concrete
on the outside and cross laminated timber boards on the inside, with vacuum
insulation between them. All of the elements are joined into a whole using
plastic beams. Combinations of concrete and timber like this make interior
decoration easier and save plenty of space and materials, because the number of
layers is reduced.
Small house needs precision in process. One of the early assembly models showing the connections between house elements.
In your Kodasema house design solutions you have implemented interesting
elements, such as old sailcloth patterns applied to exterior thin fibre-panel
wall surfaces in the course of their moulding, resulting in a truly special
texture and lightness.
was achieved after months of testing with all sorts of plastics, films and PVC
Team member Marek is experimenting with different patterns to give character to outer appearance of Kodasema.
Final result is appealing and ecological, recycling sailorcloths, capturing their pattern for future generations.
Has the development process of Koda
house been slower or faster than expected?
hoped to reach the first prototype sooner but, in hindsight, it has actually
been a fast pace process considering that we questioned and considered the
necessity and form of almost every detail.
Do Kodasema houses need foundations?
KODA doesn’t need foundations. The structure was calculated
so as to allow the floorboards to rest anywhere on stones.
First prototype of the sink in bathroom.
What are the development stages of a house as a product? How often do you meet?
Looking back, there seems to be a certain rhythm to our work, but during the
work process we just did what seemed right to us, often manoeuvring between issues
that emerged. We did not held specific meetings, it actually feels like we have
been living together for the last year and concentrating only on this project.
Initially we worked from 9 to 5 and later almost around the clock. I can´t
imagine we would have got even close to our current results, if everybody had
worked traditionally at his desk in an office, meeting once or twice a week.
One of the many meetings of Kodasema people, discussing smart technologies involved.
How long does it take for a Kodasema house to be ready - from producing the
elements at a plant to actually assembling the house?
first prototype was ready within a year. At the moment, our aim is 2-3 weeks at
Many similar undertaking have been less than successful. To date there
has been no breakthrough in the field of modern modular houses, in terms of
both technology and appearance. What makes you different?
I could list lots of reasons, I guess. Why can you manufacture cars in modules
and not houses? The car market is more uniform; there’s less fluctuation. One
of the issues with the construction industry is that real estate booms are
interspersed with more subdued periods of demand. Add to that the different
wishes of different customers, regional differences and strict regulations of
local authorities on building plans and implementation. Then there’s the
pricing pressure on the house, which comes from the cost of the plot?
Early 1 to 1 scale mockup of the house (left) helped to understand the possibilities of the space and also to figure out more creative solutions.
You have finished the first prototype. What are the main lessons you have
learned during the process, how will the next house differ from the first one?
The prototype is and will be a test house. During the whole process, we allowed
ourselves to make mistakes. If you don´t allow errors, it is very difficult to
come up with something new. If the prototype didn´t have any faults, it would
have been a wasted opportunity. The main lesson is to remember the simple truth:
the importance of a team and their dedication, i.e. time. In fact, the willingness to dedicate yourself
and concentrate on something is on the decline. As a result, original solutions
have become scarce. Main emphasis is on cheapness and sales.
You are an architect. You gave up working with fellow architects and focused on
a new and quite specific field that demands a different set of skills. What is
its appeal for you?
To me, everything that surrounds us is one single environment. When we build
something on this planet or shift materials from one location to another, we
should think about how to do it in the best possible way. If there were a
better approach or term than architect(ure), I wouldn’t hesitate for a second
to use it. I can’t agree to anyone hijacking the concept of architect(ure) and
limiting its scope. If I need other skills for more efficient project work,
I’ll have to acquire them. I’m fascinated by how deep I can become immersed in
my work, thoroughly researching new issues until I find clear and exhaustive
answers. After all, an answer to every question we pose exists somewhere out
there. Once you achieve the result you want, you should review the initial
questions you asked, as they often can and should be rephrased in view of your
achievements. That’s something you can do repeatedly, defining your objectives
again and again. The conventional practice is for the architect to do the
commissioned work and then forget about it ASAP, because tomorrow’s a new day
and a whole new world. For various reasons, input from the architect is less
and less required in drafting the concept of a building. And later, when
construction’s underway, everyone prefers the architect to get involved as
little as possible. I was never interested in going down that road. I did try
to adjust my attitude, but it never worked.
Now that you are involved in product development, how does your workday differ
from the time when you worked only as an architect?
More meetings, details, abstract discussions, creativity, doing U-turns and
starting things all over. Much less cursing, gossiping, nagging, conflicts and disputes
What is your next big objective?
I am not sure about the next one after we have achieved our first simple
objective – build thousands of houses that are becoming better in quality and
design and cheaper in price. As a professional I feel more like a car designer
than an architect, the only difference being that I also feel responsible for the
way the car parks look.
Founders of Kodasema: Hannes Tamjärv, Taavi Jakobson,
Ülar Mark, Kalev Ramjalg, Marek Strandberg, Andres Kaur
Photos by: Andres Kaur
Here you can find more information about Koda.
Founder of Kodasema Ülar Mark in the picture below) was interviewed by Tiit Sild (katus.eu). Ülar was also a jury member in the architecture contest of prefabricated houses.